WiFi Auto Reconnect v1.0

Monitors and auto reconnect to a WiFi network

  1. SmartPhoneLover
    DESCRIPTION
    This project was created based on a specific request from a user in Reddit.

    Basically, it monitors the status of the WiFi connection (in this case), in addition to Internet access. Well, in case of not detecting activity in the network (data) or not finding the access point (AP) to which it should be connected, it starts the auto-connection process automatically.

    It can be useful in those cases where access to the device is only allowed by remote connection, and its manual operation (in human presence) is not the case.

    This project includes an Initial Setup task that needs to be executed when it is imported from TaskerNet
    (It can be deleted after imported)

    Notes:
    - You can check out the thread where the request came from: Go!
    - A similar project of our dear mate @MeloProfessional is available on his Telegram channel: Go!
    - After importing, make sure to manually configure the project using the 'Setup' (and/or 'Setup (UI)') task(s).
    - Max Retries from 'Setup' task are carried out in one minute intervals (Time Ticker profile). After Max Retries reached, manual reactivation will be needed (interactible button); unless unlimited retries are indicated.

    Images

    1. Screenshot_2020-01-06-12-06-06-137_ginlemon.flowerfree.jpg
    2. Screenshot_2020-01-06-12-08-01-226_ginlemon.flowerfree.jpg
    3. Screenshot_2020-01-06-12-10-03-935_ginlemon.flowerfree.jpg
    4. Screenshot_2020-01-06-12-10-07-307_ginlemon.flowerfree.jpg
    5. Screenshot_2020-01-06-12-12-24-054_ginlemon.flowerfree.jpg
    6. Screenshot_2020-01-06-12-12-59-997_ginlemon.flowerfree.jpg