Open Bug with exit task

Discussion in 'Tasker' started by Heodn2, Jun 23, 2020.

  1. Heodn2

    Heodn2 New Member

    Joined:
    Jan 23, 2020
    Messages:
    17
    Likes Received:
    0
    I noticed a bug where the exit task will not run if you are using the time condition.

    Steps to reproduce:
    1. Set profile with time from 1:00pm to 1:05pm
    2. Put any task you want ( I just change brightness level)
    3. Turn phone off at 1:03pm
    4. Wait after 1:05pm then turn it back on.

    It will not trigger the exit task after your phone starts up past the time.
     
  2. joaomgcd

    joaomgcd Administrator Staff Member

    Joined:
    Feb 3, 2015
    Messages:
    9,479
    Likes Received:
    806
    I think the problem is that on some phones brightness can't be changed if the screen is off.
     
  3. Heodn2

    Heodn2 New Member

    Joined:
    Jan 23, 2020
    Messages:
    17
    Likes Received:
    0
    It's not when the screen is off but if the phone is completely off. You can try with another task like toggle bluetooth.
     
  4. Heodn2

    Heodn2 New Member

    Joined:
    Jan 23, 2020
    Messages:
    17
    Likes Received:
    0
    You can also try with a similar profile:
    1. Create a profile that triggers when phone is charging.
    2. Set tasks to toggle bluetooth.
    3. Charge the phone (bluetooth should turn on)
    4. Turn off the phone (leaving it plugged in)
    5. Unplug the phone
    6. Turn the phone on
    The exit task should run but it wont detect the phone was already unplugged.
     
: bug

Share This Page