AutoVera Connect autovera locally

Discussion in 'AutoApps' started by Andrew Tierney, Aug 3, 2016.

  1. Andrew Tierney

    Andrew Tierney New Member

    Joined:
    Aug 3, 2016
    Messages:
    12
    Likes Received:
    0
    Is there any way of connecting autovera to my Vera edge locally (using the local IP of my Vera) instead of going through the Internet?

    I have a lot of my logic occur using tasker (cos it has so much more capability) instead of pleg, however without connectivity to the Internet my Vera is as dumb as a post whenever I have a internet disruption

    Thanks
     
  2. joaomgcd

    joaomgcd Administrator Staff Member

    Joined:
    Feb 3, 2015
    Messages:
    9,476
    Likes Received:
    797
    That should be happening already actually. When you connect to your home wifi network it should check what the IP address is. When you open AutoVera on your local network and go to "Your Veras" do you see the IP address there? If not, can you try refreshing and see if it shows then?
     
  3. wonkxin

    wonkxin New Member

    Joined:
    Oct 16, 2016
    Messages:
    9
    Likes Received:
    0
    Hello, same problem here without internet.
    Vera Edge can be locally accessed from its webfrontend, so, Smartphone's IP is in the same LAN. AutoVera is installed on Vera. But AutoVera refresh on the smartphone doesn't work; only if both devices are connected to the internet.
    I ask for support, please. Thanks in advance
     
: Autovera

Share This Page