AutoRemote Send messages through your local network between Android devices

Discussion in 'Guides / Examples / Ideas Forum' started by joaomgcd, Feb 18, 2015.

  1. joaomgcd

    joaomgcd Administrator Staff Member

    Joined:
    Feb 3, 2015
    Messages:
    9,479
    Likes Received:
    806
    • on the device you want to receive messages via local wifi add a new tasker profile with the "Wifi Connected" condition and choose your wifi network
    • in the task add an "AutoRemote Wifi" action to start the AutoRemote Wifi service that allows you to receive messages through your local network
    • in the same task add an "AutoRemote Devices" action and set it up to send your information to the other device. This will make AutoRemote send your most up to date IP address to the other device, so it knows where to send messages to

    After this the other device should be able to send messages locally through wifi to the device you set up.
    If you want both devices to be able to receive messages this way, setup the above actions on the other device as well.
     
    Thahim likes this.
  2. z3us

    z3us New Member

    Joined:
    Feb 6, 2015
    Messages:
    25
    Likes Received:
    1
    Could you add a variable with values 0/1 depending on the state of the WiFi service?
     
  3. joaomgcd

    joaomgcd Administrator Staff Member

    Joined:
    Feb 3, 2015
    Messages:
    9,479
    Likes Received:
    806
    Can you try this version? Use the AutoRemote Query action to get the status.
     

Share This Page